SIGN UP FOR THE NEXT LEVEL OF MOUNTFIELD EXPERTISE
- Maintenance tips & tricks
- 4-season garden care advice
- News from the gardening world
- Innovations & new product launches
MM2605 - 5 in 1
Petrol garden multi tool
If you are serious about gardening, then you need this piece of kit! Mountfield's MM2605, 5-in-1 multi-tool is powered by a two-stroke engine, with 5 tools in one - resulting in space saving in your shed or garage. All your trimming and pruning needs catered for in one product. It’s genius.
- Easy start 25.4cc 2-stroke petrol engine
- Tap & Go nylon head and 3 toothed metal blade grass trimmer attachments
- 40cm Hedge Trimmer attachment
- 25cm pole pruner attachment
- 70cm Extension pole
- Single harness
£359.00
Vat Included
Product details and specs
This versatile 5 in 1 Multi-Tool from Mountfield is powered by a two-stroke engine. After mixing petrol and oil at a ratio of 40:1, the only head-scratching will be deciding which tool to fix and use first.
You have a choice: use the Tap & Go nylon head for grass trimming; the 3 toothed metal blade for cutting those scratchy brambles and other rough vegetation; trim up your hedges with the 43cm hedge trimmer dual action laser cut blades; use the 25cm pole pruner chainsaw head to clear a few low branches or fit the 70cm extension pole to reach even higher.
It’s easy to swap heads, the MM2605 5 in 1 is comfortable using the single harness (included) and each and every tool is effective. It’s just a pity that there isn’t a built-in Thermos flask carrier. You can’t have everything, but this product does come with a five-year extended warranty! (T&C's apply).
Product Dimensions with various attachments
• Length of Unit as a Pole Pruner - 207cm
• Length of Unit as a Pole Pruner with extension pole - 277cm
• Length of Unit as a Hedge Trimmer - 226cm
• Length of Unit as a Hedge Trimmer with extension pole - 296cm
For advice on the garden tool best suited to your requirements please call our Technical Helpline on 0800 669 6325 or contact your local Mountfield Dealer who will be happy to advise you.
You have a choice: use the Tap & Go nylon head for grass trimming; the 3 toothed metal blade for cutting those scratchy brambles and other rough vegetation; trim up your hedges with the 43cm hedge trimmer dual action laser cut blades; use the 25cm pole pruner chainsaw head to clear a few low branches or fit the 70cm extension pole to reach even higher.
It’s easy to swap heads, the MM2605 5 in 1 is comfortable using the single harness (included) and each and every tool is effective. It’s just a pity that there isn’t a built-in Thermos flask carrier. You can’t have everything, but this product does come with a five-year extended warranty! (T&C's apply).
Product Dimensions with various attachments
• Length of Unit as a Pole Pruner - 207cm
• Length of Unit as a Pole Pruner with extension pole - 277cm
• Length of Unit as a Hedge Trimmer - 226cm
• Length of Unit as a Hedge Trimmer with extension pole - 296cm
For advice on the garden tool best suited to your requirements please call our Technical Helpline on 0800 669 6325 or contact your local Mountfield Dealer who will be happy to advise you.
What's in the box
MM2605 - 5 in 1
Petrol garden multi tool- lensNylon cutting head
- lensMetal blade
- lensSingle harness
- lensHedge trimmer attachment
- lensPruner attachment
- lensExtension shaft
- lensScrewdriver
- lensSocket spanner
- lensPlastic bottle
Technical specs
General info
EAN/UPC
8008984640993
SKU
287120153/M16
Power
Power
0.7 kW
Power source
Petrol 2-stroke
Displacement
25.4 cm³
Engine rotation speed
11000 rpm
Maximum engine speed
11000 rpm
Idling speed (+/- 100)
3100 rpm
Starter
Easy start recoil
Primer
Yes
Choke
Manual
Fuel tank capacity
0.65 l
Carburettor type
Rotary valve
Ignition coil type
Analogic
Air filter type
Sponge
Cutting system
Nylon line diameter (millimeter)
2,4
Cutting width
43 cm
Cutting length
40 cm
Blade length
43 cm
Nylon head type
Tap & Go dual line
Nylon line length
4 m
Blade type
Dual action - Laser cut
Teeth distance
25 mm
Blade diameter (brushcutter)
255 mm
Blade type (brushcutter)
3 T
Blade rotation angle
180 °
Bar type
Sprocket nose
Bar length
25 cm
Bar length (inches)
10 in
Chain type
3/8" .050" (91PJ-40X)
Chain speed
5.2 m/s
Chain oil tank capacity
0.12 l
Chain oil pump
Automatic
Chain tensioning system
Front screw tensioning
Equipment
Handle type
Loop
Vibe Control System (VCS)
Yes
Shaft tube diameter
26 mm
Inner shaft diameter
8 mm
Brushcutter attachment
Yes
Lawn trimmer attachment
No
Hedger attachment
Yes
Soft grip handle
Yes
Shaft extension
70 cm
Harness
Single
Pruner attachment
Yes
Tools kit
Included tools kit
Spark plug key, screwdriver
Vibration and noise data
Hedger guaranteed sound power level (LwA) dB(A)
107
Hedger measured sound pressure level at operator ear (LpA) dB(A)
97,8
Pruner guaranteed sound power level (LwA) dB(A)
111
Pruner measured sound pressure level at operator ear (LpA) dB(A)
97,8
Overall dimensions
Pack weight
15.98 kg
Product weight (brushcutter version)
8.2 kg
Product weight (hedger version)
9.2 kg
Product weight (pruner version)
8.9 kg
Product weight (trimmer version)
8.4 kg
Product length
1860 mm
Product width
385 mm
Product height
340 mm
Weight
8.2 kg
Support
What type of maintenance should be done on the saw accessory tool?
To ensure the petrol garden multi tool is functioning correctly and to maximise its lifetime, we recommended that you clean the space behind the bar cover regularly (depending on the frequency and intensity of use), as dirt and sawdust constantly build up in these areas.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
We recommend that you check the chain oil level inside the tank regularly in order to always ensure that the cutting tool is properly oiled. Then make sure that the chain is always running in the track and, if not, thread it yourself or visit an authorised maintenance provider.
It is important to refer to the user and maintenance manual for details of each of these tasks.
Do the cutting blades need maintenance or sharpening?
Cutting (especially cutting hedges) leads to the accumulation of detritus and dirt between the blades. Without the necessary maintenance, this issue can reduce cutting performance.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades should therefore be cleaned and oiled after each period of use. This can be done with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades of the hedge cutting accessory seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.
What should I do when it is not being used?
During the times when it is not being used, we recommend you empty the fuel tank, clean the cutting elements and place the petrol garden multi tool in a safe place, ensuring you protect the blade within their storage area.
Manuals
You may also be interested in
Check items to add to the cart or
Petrol garden multi tool
Hedger attachment
Yes
Pruner attachment
No