Ask the Experts on 0800 669 6325 Mon - Fri 9am-5pm - Sat 10am-4pm or Contact Us

open_in_full

MHT 2322

Petrol hedge trimmer

The MHT 2322 hedge trimmer is powered by a 2-stroke engine and has a cutting length of 50cm. It’s easy and comfortable to use. It’s also highly effective at making light work of overgrown hedges in any garden.
  • Easy start 22.5cc 2-stroke petrol engine
  • 60cm double reciprocating blades
  • 27mm cutting capacity
  • Three grip positions
  • Weighs 5.5kg - comfortable for long usage
  • Powerful and efficient
  • Promotions
Special Price £169.00 Regular Price £209.00 Your Saving: -£40.00
Vat Included

Product details and specs

MHT 2322 detail 10
MHT 2322 detail 11
MHT 2322 detail 12
MHT 2322 detail 13
MHT 2322 detail 14
MHT 2322 detail 15
MHT 2322 detail 16
MHT 2322 detail 17
MHT 2322 detail 18
The MHJ 2322 is a superb hedge trimmer perfect for most gardens and inherent tough hedges.

The 60cm double reciprocating blade offers a cutting length of 56cm, making light work of hedges. With a choice of three grip positions this unit is easy to use.

Weighing in at 5.6kg, the MHT 2322 is comfortable for long usage. The easy start 22.5cc 2 stroke engine (40:1 petrol: oil ratio) is both powerful and efficient.

It carries a This multi-tool comes with a 5-year extended warranty. (T&C's apply)

For advice on the garden tool best suited to your requirements please call our Technical Helpline on 0800 669 6325 or contact your local Mountfield Dealer who will be happy to advise you.

What's in the box

MHT 2322
MHT 2322
Petrol hedge trimmer
  • lensBlade Cover

Technical specs

General info
EAN/UPC
8008984840706
SKU
252421003/M21
Power
Power
0.65 kW
Power source
Petrol 2-stroke
Displacement
22.5 cm³
Engine rotation speed
10500 rpm
Maximum engine speed
10500 rpm
Idling speed (+/- 100)
3000 rpm
Starter
Recoil
Primer
Yes
Choke
Automatic
Fuel tank capacity
0.26 l
Carburettor type
Butterfly valve
Ignition coil type
Digital
Air filter type
Paper
Cutting system
Cutting length
50 cm
Blade length
60 cm
Blade type
Dual action
Blade teeth speed
4000 spm
Teeth distance
35 mm
Cutting capacity (diameter)
27 mm
Equipment
Handle type
Turnable 180° - 3 positions
Vibe Control System (VCS)
Yes
Soft grip handle
Yes
Vibration and noise data
Guaranteed sound power level (LwA) - dB(A)
108
Measured sound power level dB(A)
105.5
Measured sound pressure level at operator ear dB(A)
99.5
Vibration level front handle (m/s2)
3.3
Vibration level rear handle (m/s2)
3.8
Overall dimensions
Pack weight
7.1 kg
Product length
1096 mm
Product width
244 mm
Product height
202 mm
Weight
5.6 kg

Support

Which type of vegetation can you work on with this machine?
This machine's petrol engine is very powerful. The structure of the blade and the distance between the teeth provide a high cutting ability. The combination of these factors allows you to tackle large hedges with dense vegetation and thick branches.
What should I do when it is not being used?
During the times when it is not being used, we recommend you empty the fuel tank, clean the teeth of the cutting element and place the machine in a safe place, ensuring you protect the blade within the storage area.
Do the cutting blades need maintenance or sharpening?
Cutting hedges leads to detritus and dirt building up between the blades, an issue which without the necessary maintenance can lead to a loss of cutting performance.
After each period of use, you should therefore clean and oil the hedge cutting blades, ensuring you work with the machine in full safety in a horizontal position, laid steadily on the ground. The blades can be cleaned with a dry cloth, using a brush if needed to remove more stubborn dirt. The blades can be oiled by applying a thin layer of specific oil (Stiga recommends using non-polluting products) along the upper edge of the blade.
Please see the user manual for more information on this point.
The blades seem to be working as if they are not clean or fluid. What might have happened and what should I do?
Where the blades tend to catch and you notice a reduction of cutting performance, possibly along with more blade noise, you must check the cutting element.
If the problem persists even after cleaning and oiling the blades, the solution is to sharpen them.
For reasons of safety, this is best performed by an authorised Stiga vendor. Once sharpened, the cutting system will return to working precisely and fluidly.
Lastly, please note that an excessively worn or damaged blade must not be sharpened but always replaced. Again in this case, the Stiga vendor network is always available.

Manuals

Free Delivery
Only on selected models

Free returns
within 14 days

Payments

Spread the cost

Search engine powered by ElasticSuite
How big is your Garden?
Draw around your lawn on the map to find the most suitable products.
Zoom in on your property. Click or tap to draw a path around your garden to measure the area.